EN
31
Display
Operating Procedure
Description
The following is the procedure for turning
on the power to the espresso machine.
lease follow the procedures carefully
to a oid any damage to the espresso
machine.
roceed chec ing for water connection
to the espresso machine.
roceed ma ing sure you ha e lled the
boilers.
Start Up Procedures
Turning the Espresso
Machine On
HAZARDOUS VOLTAGE DISCONNECT FROM POWER
SUPPLY BEFORE SERVICING
WARNING
SB F I L L ED?
GROUPS B L ED?
L a
M
a r z o c c o 0 0 : 0 0
CB
O
9 3 . 8
°
C SB
O
1
3
1
2
4
Turn the ain witch to the position.
To continue with the start up process press the T button
after lling the steam boiler.
To continue with the start up process press the T button
after the saturation of the coffee boiler.
The rectangles ne t to
and
indicate the warming up of the water contained in the boilers. hen the set
temperature is reached these rectangles turn off and all the lights of the buttons turn on. ow the machine
is ready for use. uring the normal operation of the machine the flashing of the rectangles indicates the
intermittent heating necessary for maintaining the temperature.
NOTE:
nsure all air is remo ed from the group prior to staring the espresso machine.
This only needs to be completed once during the initial setup or when water is drained from the coffee boiler.
nstructions for bleeding the groups of air can be found in the nstallation uide.
