7. LCD
Overview
8. Function
test:
Once the weather station is powered up, perform a function test by
checking that the weather data is received. To do this, press the
DISPLAY, PRESSURE or WIND keys to toggle through the relevant
LCD sections:
The following illustration shows the full segments of the LCD for
description purposes only and will not appear like this during
normal operation and use.
1) Indoor
temperature and humidity
2) Outdoor
temperature and humidity
3) Outdoor wind chill
4) Dew
point
5) Rainfall 24 hour
6) Rainfall
1hour
7) Rainfall
Total
8) Relative and absolute pressure
9) Wind speed, wind direction and wind direction in degrees
If any readings cannot be received from the sensors, lines (- - -) will
be displayed in the respective weather sections of the LCD. In this
case, check that all cables are correctly inserted into the correct
sockets and/or check the batteries in the outdoor thermo/hygro
sensor and press and hold the PLUS (+) key for 2 seconds and a
short beep will sound to synchronize the base station to the sensors
otherwise no weather data will be received.
Some weather readings such as wind speed and direction may not
appear immediately on the LCD if the wind-fan or vane of the wind
sensor is moved. This is due to the set reading time intervals for the
wind readings. However the current wind speed or direction will be
displayed once the time reading interval is reached. For rainfall, the
interval readings may take up to 2 minutes before the data is
displayed on the LCD.
15. 24h, 1h or total hour display
16. Humidity display as RH%
17. Rainfall units (inch or mm)
18. Temperature display units (ºC or ºF)
19. Outdoor temperature/humidity display
20. Indoor temperature/humidity display
21. Dew point temperature display
22. Wind chill temperature display
23. Wind alarm icon
24. Wind information for Min/Max speed
and wind speed low, high, direction
alarm
25. Wind direction and speed (m/s, knots,
Beaufort, km/h or mph) display
26. Alarm buzzer ON/OFF icon
27. General alarm icon
1. Low battery indicator
2. WWVB radio controlled time icon
3. Date
display
4. Time zone display
5. Date, seconds, alarm time and time
zone
6. Alarm
icon
7. Weather forecast icons
8. Weather tendency indicator
9. Pressure alarm display
10. hPa/inHg air pressure unit
11. Pressure units (relative or absolute)
12. 433MHz reception icon
13. Rainfall display
14. Indoor, outdoor, humidity, dew point,
wind chill, rainfall alarm icon
9. Mounting
27
26
25
24
18
21
22
20
19
11
23
17
15
6
8
7
5
4
3
2
1
10
13
14
12
9
16
Important Note
Prior to drilling mounting holes and permanently affixing any of the
units, please ensure the following points are considered:
•
Cable lengths of the units meet with your distance requirements
at the point of fixing
