INSTALLATION GUIDE FOR
“C
HÂTEAU
” RANGE
- G4
08NOTINSTALG4/EN - 3
72
IGNITION
–
ADJUSTMENTS
Please make sure your cooker is unpacked completely before use. Remove all tape and packaging.
Empty the drawer and remove the protection from the instant heating plate.
Make sure that the burners of the hob and oven are correctly positioned and are level.
Remove the accessory pack from the oven and install the RCC disc.
Check to be sure that no parts have come loose during shipping.
1.
STARTING WITH THE COOKTOP ELEMENTS
INITIAL IGNITION
Defuse any trapped air from the gas network, starting with each of the burners on the
cooktop. Once this is done, the gas oven can then be ignited.
However, if the safety device for the oven is activated (red indicator ON), press the reset
button above the red indicator to repeat the procedure.
The gas burners on our "Château" range appliances are fitted with safety thermocouples: if a burner shuts
off for any reason, the gas supply for that burner is automatically stopped.
When starting, the knob must not be activated for more than 15 seconds; if, after this time, the burner has
not ignited, you should stop trying to ignite and wait at least one minute before trying to reignite the
burner.
1.1
GAS HOBS WITH ELECTRIC IGNITION (SMALL, LARGE AND MAXI BURNER)
All of our appliances are originally equipped with automatic gas burner
ignition.
To ignite a gas burner, press the control knob and turn it to the
left to the "high flame" position.
The burner is automatically ignited. Keep the knob pressed for 5
– 10 seconds (the safety thermocouple may take longer to react
the first time).
The sparking noise means that the ignition system is operating
normally.
Low setting:
this is achieved by rotating the knob fully to the
left or to the bottom.
Shutoff:
bring the knob back to its vertical position by rotating it
to the right.
In case the burner flame is accidentally turned off, close the
burner control knob and do not turn on the burner for at least one
minute.
Small and large burner
maxi burner
