INSTALLATION GUIDE FOR
“C
HÂTEAU
” RANGE
- G4
08NOTINSTALG4/EN - 3
61
“La Cornue” is able to offer customised hood models in materials matching your cooker.
The ventilation hood has to be built with non-combustible materials.
For optimum efficiency, the fresh air inlet for renewing the air extracted by the hood must
be located either directly at the back of the appliance or within a 2 – 3m. radius, at ground
level.
1.2.
INSTALLATION (SEE ABOVE)
As the oven and the hob are particularly well insulated, the appliance can be built-in without
any need for any special precautions with regard to the surroundings. We recommend leaving
5 - 10 mm either side between the units so that the cooker can be moved.
However, if the cooker or the cooktop is installed against a wall, the hottest parts (the
strip between 60 and 95cm. from the floor, and the surface between the cooktop and the
extractor hood) must be protected with a stainless steel plate or ceramic tiles.
La Cornue
is able to offer you several backsplash (stainless steel plate) at dimensions according to your
stove.
A flame retardant support must be planned for hobs to insulate the units underneath it.
(5-10 recommended)
(5-10 recommended)
MINIMUM DISTANCES FROM THE KITCHEN UNITS (in mm.)
M
INI
M
UM
750
RE
COM
M
E
ND
E
D
900
