L-Acoustics LA-RAK, Руководство пользователя

Страница: 189 / 201

Flown array options and site angle setting
Flown array options and site angle setting
Using M-BUMP
M-BUMP rigging options
L-Acoustics recommends 5 different rigging options to y the M-BUMP for arrays containing Kara and/or SB18
enclosures. It is possible to use 0, 1, or 2 M-BAR and 1 or 2 rigging points (see gure below).
Always refer to the mechanical data and warning indications provided in Soundvision Software (
Mechanical
Data
section) to verify the mechanical conformity of the loudspeaker system before installation.
Option 1: 0 M-BAR, 1 point
1 motor
3 positions (front, center, rear)
Option 2: 0 M-BAR, 2 points
2 motors
Fixed front and rear positions
(spacing = 400 mm/15 inch)
Option 3: 1 M-BAR, 1 point
1 motor
Variable position (see
M-BUMP site angle setting
(p.190))
Left view = rear extension conguration
Right view = front extension conguration
Option 4: 1 M-BAR, 2 points
2 motors
Fixed front and rear positions
(spacing = 900 mm/35 inch)
Left view = rear extension conguration
Right view = front extension conguration
Option 5: 2 M-BAR, 2 points
2 motors
Variable position from front to rear
Same hole number for both points [8.2.2]
(spacing = 663 mm/26 inch)
Left view = rear extension conguration
Right view = front extension conguration
Kara owner's manual (EN) version 1.0 189