
The canopy panel is located on the top of the D6 cases and should not have been removed for
routine maintenance. Removal was not necessary to facilitate maintenance to the canopy. To
install the canopy panel, perform the following:
1. Install canopy panel into position on the case.
2. The canopy panel is secured to the case with several screws (quantity is dependant upon
the type of D6 case) located on the top of the D6 case. Install screws securing the canopy
panel to the case.
3. Install the trim on the front of the canopy panel. Refer to the installation procedure later in
this
Kickplates
There are variances in kickplate configurations, dependant upon the line up of the cases. All
cases are equipped with a center kickplate. For cases that have left or right end panels, an
additional kickplate is provided for finishing the ends.
Kickplate
(Center)
The kickplate is installed on the bottom, front of the case between the raceway and the floor. To
install the kickplate, perform the following:
1. Install the kickplate into position and line up the holes in the kickplate with the
pre-punched holes in the case.
2. Use screws to secure the kickplate to the case.
3. Install the end kickplate (if applicable).
4. Install the kickplate trim following the case trim installation procedure.
End Kickplate (Left or Right End)
The end kickplate is installed on the bottom, end of the case between the raceway and the floor.
To install the end kickplate, perform the following:
1. Install the end kickplate into position and line up the holes in the end kickplate with the
pre-punched holes in the kickplate (center).
2. Use screws to secure the end kickplate to the kickplate (center).
3. Install the kickplate trim following the case trim installation procedure.
INSTALLATION/ASSEMBLY
76
Содержание 6RLG3
