Kyosho MANOI AT01, Руководство пользователя

Страница: 79 / 106

80
工程
B
04
ボディカバーの切り離し
作業の手順
使用するパーツ
危険
1
2
OperationB04 Separating of Body Cover
Right Arm Cover
Left Hand Cover
Right Hand Cover
Left Upper Leg Cover
Right Upper Leg Cover
Left Lower Leg Cover
Right Lower Leg Cover
Left Foot Cover
Right Foot Cover
Eye Ball
Chest Ball
Danger
Cutting Tools which will be used in this process could cause injure by mistake or worng way to use.
Please watch your hands and surrounding area, do work with making sure safety.
Separate each parts at cutting line(See figure in P81-84)
Protection film may start loosing from surface of parts as separating parts, but
but keep this film at surface of the part until painting is done.
A part of cut could be sharp enough to cause injury. Be carefull with sharp part and
cut sharp down by scissors ro some tools or make unsharp by file.
Using Cutter, do not cut strongly, but cut as trace cutting line several time to make ditch.
then, bent that ditch several time by hand to separate parts.
If use satndard scissors, cut at base part of scissors, it will be easy to put some muscle.
If you use Round Cutter, it will be easier and nicer than using satndard scissors.
Make 2mm or 6mm hole by borer etc at positons pointed in figure.
Hold Body Cover on by Tapes beofre working, it can be better finishing.
Place soft wood other side of place of making hole, it can be nice finishing.
If use reamer for hobby models in hobby shop it will be easier to make better hole.,
Head Cover
Front Mask
Rear Cover
Chest Cover
Back Pack
Left Shoulder Cover F
Left Shoulder Cover R
Right Shoulder Cover F
Right Shoulder Cover R
Left Arm Cover