Kyosho MANOI AT01, Руководство пользователя

Страница: 30 / 106

30
5
6 6
4
ローハイトホーン
3 × 8mm
2 × 6mm
4 5
3
3
Find mold of "1" which is indicate
near axix fo Low Height horn and
insert a 2 x 6 countersunk screw
into hole just above of it form backside.
Stop teighten when head of countersunk screw
at about 2mm up on Low Height Horn,
Push Low Height Horn to side of
Output Axis of Servo.
As figjre, Push Low Height horn as
Screw from Low height horn is at as
near as possible of right overhead.
Due to mesh of seratted, it may not be able
to match with right overhead perfectly.
Rotate and Push into at most nearest
point of right overhead
Fix Low Height Horn by 3 x 8 Bind Tapping Screw,
Turn back Unit of ‑ process,
and remove countersunk screw.
3
5
Removed screws will not be used for this
product. Keep it in Plastic Bag.