Kyosho MANOI AT01, Руководство пользователя

Страница: 28 / 106

28
工程
07
アームユニットの組み立て
作業の手順
1
2
3
使用するパーツ
エルボーユニットR
ハンドユニットR
2.6×8m m
エルボーユニットL
ハンドユニットL
2.6×8m m
mm
グリス
アームユニットL
ボトムブッシュ
3×12mm
グリス
アームユニットR
ボトムブッシュ
ボトムブッ
3
3×12m m
1
3
2
ボトムブッシュ
Operation07 Aseembling of Arm Unit
Elbow Unit L,R
(the ones which were asembled in
Opperation05)
Hand Unit L,R
(the ones which were asembled in
Opperation05)
Bottm Bush x 2
3x 12 Bind Tapping Screw x 2
2.6 x 8 Bind Tapping Screw x 2
Slicon Grease
Bottm Bush
Insert Apper Arm of Hand Unit L into
Base part of Single Arm of Elbow Unit L.
As same, Insert Apper Arm of Hand Unit R into
Base part of Single Arm of Elbow Unit R.
Be carefull with L unit and R unit.
Fix Upper Arm and Base part of Single Arm
by a 2.6 x 8 Bind Tapping Screw.
Be carefull of too tighten.
2
Do on both L and R.
Coat Sillicon Grease slimly at diagonal line part
of Bottm Bush as in figure, and fit Bottm Bush
into Single Arm,and fix by 3 x 12 Bind
Tapping Screw,
Be carefull of too tighten.
Do on both L and R.
Hand Unit + Elbow Unit will be called
Arm Unit L or R.
Grease
Grease
Grease
Bottom Bush
Bottom Bush
Arm Unit R
Arm Unit L
Hand Unit L
Hand Unit R
Elbow Unit L
Elbow Unit R