User Guide for the Kyocera KX16 Phone
37
7
U
SING
THE
C
AMERA
Tips before operating your
camera
• You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a “Low memory” error on your
phone’s screen, check your resolution and
quality compression settings. See “Setting up
the camera” on this page.
• If there is no activity within approximately
45 seconds after you turn your camera on,
then the camera quits and returns to the
previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Setting up the camera
for photos
1.
With the flip open, select
Menu
→
Camera.
2.
Select
Options
.
3.
Scroll left or right on the horizontal menu bar
using .
4.
Select
Settings
.
5.
Scroll down to highlight an option and
press :
–
Flash
On, Off, or Automatic.
–
Resolution
options are 640 x 480,
320 x 240 (best for sending to email
and viewing), and 160 x 120.
–
Low Light Mode
brightens the picture
for low light environments.
–
Self Timer
options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps tones from 3 seconds down
to the time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
mode is activated.
–
Multishot
options are On or Off (default).
When set to On, the camera allows you to
take multiple pictures (up to six) while
the camera key is pressed and held. A tone
plays each time a picture is taken. A
second tone plays when the final picture
is taken.
–
Shutter Sound
sets the sound used when
the shutter closes while taking a picture.