User Guide for the Kyocera KX16 Phone
13
Receiving data or faxes
Your phone may be able to receive certain data
or faxes, depending on the system sending the
information. For more information, see “Setting
the phone to receive data or faxes” on page 26.
Setting roaming alerts
and ringers
Setting an alert for roaming
You may use this setting if you want the phone
to alert you when you roam outside of your home
service area.
1.
Select
Menu
→
Settings
→
Network
→
Roam/Svc Alert
.
2.
Select an option and press
.
–
When no svc
alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
–
On roam change
alerts you with two
decreasing tones when roaming service
is acquired and three increasing tones
when home area service is acquired again.
–
On any change
alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
1.
Select
Menu
→
Settings
→
Sounds
→
Roam Ringer
.
2.
Highlight
Enabled
to hear the ringer.
3.
Press
to set.
Setting Call Guard to avoid
roming calls
You can set the phone to warn you before you
answer or place a call while roaming.
• Select
Menu
→
Settings
→
Convenience
→
Call Guard
→
Call prompt
.
– The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
– To accept or place a call while roaming,
you must press
.
Note:
This functionality is disabled when the
phone is in emergency mode.
Controlling network roaming
Specifying digital or analog mode
Depending on services available from Alltel,
you may set the phone to either digital or analog
mode. This is useful if you are in an area that
borders on digital service and the automatic
feature is causing the phone to keep switching
between modes.
1.
Select
Menu
→
Settings
→
Network
→
Digital/Analog
.