Kyocera ECOSYS MA2100cfx, Руководство по эксплуатации, Страница: 337 / 408

10-14
Troubleshooting > Troubleshooting
The altitude is 1000 m or
higher and irregular
horizontal white lines appear
in the image.
― Select the [ System Menu/Counter ] key
> [ Adjustment/Maintenance ] >
[ Service Setting ] > [ Altitude
Adjustment ], and set to an elevation
one level higher than the current setting.
―
The altitude is 1000 m or
higher and dots appear in
the image.
― Select the [ System Menu/Counter ] key
> [
Adjustment/Maintenance
] >
[ Service Setting ] > [ Altitude
Adjustment
], and set to an elevation
one level higher than the current setting.
―
Printouts have vertical lines. Is the slit glass dirty? Clean the slit glass. page 10-3
― Select the [ System Menu/Counter ] key
> [ Adjust/Maint. ] > [ Service Setting ] >
[ LaserScanner Cln ], and then select
[ Yes ].
―
Dirt on the top edge or back
of the paper.
Is the interior of the machine dirty? Clean the interior of the machine. page 10-4
Part of the image is
periodically faint or shows
white lines.
― Open and then close the rear cover. ―
― Select the [ System Menu/Counter ] key
> [
Adjust/Maint.
] > [
Service Setting
] >
[ Drum Refresh ], and then select [ Yes ].
―
― Select the [
System Menu/Counter
] key
> [ Adjust/Maint. ] > [ Service Setting ] >
[
MC
] and decrease the adjustment
value. Decrease the adjustment value 1
level at a time from the current value. If
there is no improvement after the value
is decreased by 1 level, decrease by 1
level again. If there is still no
improvement, return the setting to the
original value.
―
Symptom Checkpoints Corrective Actions
Reference
Page