Kyocera DP-750, Руководство по обслуживанию

Страница: 73 / 124

3LL/3LK
1-4-7
(7)
An original jams in
DP is indicated dur-
ing copying (jam in
the original switch-
back section 1).
Jam code 76 Defective switch. Run maintenance item U244 and turn the following switch on and
off manually. Replace the switch if indication of the corresponding
switch on the touch panel is not displayed in reverse.
DP timing switch 1, switchback tray switch
Defective motor. Run maintenance item U243 and select the following motor on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Original conveying motor, original switchback motor
(8)
An original jams in
DP is indicated dur-
ing copying (jam in
the original switch-
back section 2).
Jam code 77 Defective original registra-
tion switch.
Run maintenance item U244 and turn the original registration
switch on and off manually. Replace the switch if indication of the
corresponding switch on the touch panel is not displayed in
reverse.
Defective motor. Run maintenance item U243 and select the following motor on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Original switchback motor, original feed motor
(9)
A original jam in the
DP is indicated as
soon as the main
power switch is
turned on.
(DP cover open
JAM).
Jam code 78 A piece of paper torn from
original is caught around
original feed switch, original
registration switch or DP
timing switch 1/2. Check visually and remove it, if any.
Defective switch. Run maintenance item U244 and turn the following switch on and
off manually. Replace the switch if indication of the corresponding
switch on the touch panel is not displayed in reverse.
Original feed switch, original registration switch, DP timing switch
1/2
(10)
An original jams in
DP is indicated dur-
ing copying (jam in
the original eject sec-
tion).
Jam code 79 Defective switch. Run maintenance item U244 and turn the following switch on and
off manually. Replace the switch if indication of the corresponding
switch on the touch panel is not displayed in reverse.
DP timing switch 1, original eject switch
Defective motor. Run maintenance item U243 and select the following motor on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Original feed motor, original switchback motor
Problem Causes/check procedures Corrective measures