Kyocera DP-750, Руководство по обслуживанию

Страница: 29 / 124

3LL/3LK
1-3-9
U087
Setting DP reading position modification operation
Description
The presence or absence of dust is determined by comparing the scan data of the original trailing edge and
that taken after the original is conveyed past the DP original scanning position. If dust is identified, the DP
original scanning position is adjusted for the following originals.
Purpose
When using DP, to solve the problem when black lines occurs due to the dust with respect to original reading
position.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [CCD]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Method: [BLACK LINE]
1. Select [CLEAR].
2. Press the start key. The setting is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
CCD Setting of standard data when dust is detected.
BLACK LINE Initialization of original reading position.
Display Description Setting range Initial setting
CCD R Lowest density of the R regard as the dust 0 to 255 145
CCD G Lowest density of the G regard as the dust 0 to 255 145
CCD B Lowest density of the B regard as the dust 0 to 255 145