Safety Precautions
●Do not wear gloves while removing/attaching
the back cover. Any minute particles
becoming lodged between contact surfaces
(a single hair, etc.), no matter how small, can
cause seepage. Before closing the cover,
wipe any water, soiling, etc. with a dry, clean
cloth, no matter how small.
●Any deterioration or damage with the back
cover will affect water resistance.
Attaching the back cover
Note the orientation of the back cover and
place it on the main unit with the main unit
closed, and attach the back cover.
After attaching the back cover, trace the
circumference of the back cover in direction
① with fingers and press in direction ② to
install the back cover completely.
②
①
■If any liquid other than water gets on the
product
●If anything other than water (seawater,
washing detergent, alcohol, etc.) gets on the
product, immediately rinse with water.
●You can wash the product under a mild flow
(up to 6 liters per minute) of tap water at
room temperature (5℃ to 35℃ ) at a distance
of about 10 cm from the faucet or
showerhead.
●If soiled, wash by hand without using a brush,
etc., holding the product so that the back
cover does not open.
■After the product gets wet
●After becoming wet, drain water, and then
without removing the back cover, wipe both
the product and back cover with a dry, clean
cloth.
●In cold regions, any water on the product may
freeze. Using the product with frozen water
may cause malfunction. Do not leave water
drop on the product.
■Rubber seal
●The rubber seal on the back of the back cover
is important in maintaining water resistance.
Do not scratch or remove it.
39
