Kyocera Angel KX18, Руководство пользователя

Страница: 92 / 97


PAGE 85

Making a call using digit dialing

USING VOICE RECOGNITION
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
Waking up the phone
If your phone is connected to a Kyocera
installed hands-free car kit, you can use the
voice command to activate the phone to
make a phone call.
Note: Voice Wake-up does not work with
Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu → Settings → Voice
Features → Voice Wake-Up → With
accessory.
2. Select Menu → Settings → Keyguard →
Disabled , then press the Amp’d/OK
key .
To wake up the phone:
1. Say “ Wake Up ” and listen for a tone.
2. Say “ Wake Up ” again until you hear two
tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 86.
Answering the phone
You can set your hands-free car kit to (1)
answer automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer
automatically.
Note: This setting also works with the
portable hands-free car kit.
• Select Menu → Settings →
Accessories → Auto-Answer →
After 5 secs .
Answering using voice commands
If Auto-Answer is turned off, you can use a
voice command to answer an incoming
call using the installed hands-free car kit.
• Select Menu → Settings → Accessories
→ Auto-Answer → Disabled .
To activate the Voice Answer setting:
1. Select Menu → Settings → Voice
Features → Voice Answer .
2. Highlight Enabled and press the Amp’d/
OK key .
3. Select Menu → Settings → Silent Mode
→ Normal Sounds , then press the
Amp’d/OK key .
To answer a call:
When you receive an incoming call, the
phone responds: “Incoming call, answer?”
or “Incoming roam call, answer?” If the
caller is recognized as a contact entry in
your phone, then the phone will say
“Incoming call from (Name), answer?”