PAGE 51
Saving, editing, and erasing PTT contacts
USING PUSH TO TALK
If you do not enter a contact name, the
contact phone number will appear on
your phone instead of a name.
6.
Press the left softkey
to
select
Save.
The message, “Sending request...”
appears.
– If the PTT contact number is valid
and the other party accepted your
request to be added, “Contact
Name Added” appears.
– If the other party refused your
invitation or did not respond within a
3-minute period, “Contact Name
Not Added” appears.
Note:
The other party cannot receive or
respond to your invitation if their phone
is off or if they are outside of the service
area.
7.
If “Contact Name Not Added”
appears, press the left softkey
to
select
OK
and return to the PTT menu.
Erasing a PTT contact
1.
Select
Menu
→
Push to Talk
→
PTT Contacts
. Highlight the PTT contact
name you wish to erase.
2.
Press the right softkey
to select
Options
.
3.
Press the Navigation key
down to
select
Erase Contact
.
4.
Press the left softkey
select
Yes,
or
press the right softkey
to select
No.
5.
To erase additional contacts, press the
Navigation key
up or down and
select their names and repeat the
process above.
Checking your contacts’ availability
In the Recent Calls lists and the PTT menus,
icons appear next to PTT contact and
group names to show their availability to
participate in a call.
.Checking and setting your availability
Available
—A bold PTT icon means the
contact (or one member of the group)
can accept calls.
Do Not Disturb
—The PTT icon with an X
means that PTT calls cannot be made
to the contact (or any member of the
group).
Off-Line
—A dim PTT icon means the
handset is turned off, or the
contact is
not registered with the voice network.
Contact or group Member is available
Contact or group Member is not
available
Contact or group Member is set to
DND (do not disburb)
Contact or group Member is
temporarily unavailable
Contact or group Member is in
pending (originator)
Contact or group Member is in
pending (terminator)
Contact or group Member is in state
unknown (awaiting server update
Group is available