Kyocera Mita FS-9100DN, Руководство по эксплуатации

Страница: 133 / 145

Chapter 3 Printing Through Application Software
3-8
DF-75 provides the staple, punch and double-sided stitching
print functions.
Browse File > Print . The Print dialog box will be dis-
played.
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX .
Select the range of the pages you want to print in the
document,
All or Current page only in Page range .
To print part of the document, check Pages , then enter
page numbers separated by commas.
Specify the number of copies you want to print in the
Number of copies combo box in Copies .
Click the Properties button and then click the Output
tab.
Click on the Output to drop down list. Select Finisher
[Face-down] or Finisher [Face-up] . To use the staple
or punch function, select [Face-down] .
Finishing Options
Collate: sets whether the pages are collated or
not.
Reverse
Page Order: prints in the reverse page order.
Staple:
selects the staple position: Upper Left,
Upper Right or Booklet (stitching posi-
tion).
Offset: outputs pages while shifting them alter-
nately for each document.
Punch: selects the hole punch type: 2-Hole, 3-
Hole or 4-Hole.
Click the Layout tab, check the Booklet Mode check-
box, and then select Left Edge Binding or Right Edge
Binding .
Click the Media tab, and then click on the Page Size
drop down list. Select the proper page size. A5 was se-
lected for the following example.
3.5 Using the Document Finisher
(DF-75)
1
3
2
4
2
3
4
5
6
7
8