KYMCO DINK 200, Руководство пользователя, Страница: 10 / 225

1
. GENERAL INFORMATION
1-8
DINK 200
 After routing, check that the wire harnesses
are not twisted or kinked.
 Wire harnesses routed along with handlebar
should not be pulled tight, have excessive
slack or interfere with adjacent or
surrounding parts in all steering positions.
 When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according to the
operating instructions.

Be careful not to drop any parts.
 When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.

Do not bend or twist control cables.
Damaged control cables will not operate
smoothly and may stick or bind.
Do you understand
the instrument?
Remove Rust!