23
22
Another Installation Options
Ⅱ
Installation
Components
Faucet Diverter Valve
see faucet diverter valve components – Page 27
Water Supply Tubing (to product)
see genesis bottom view – page 27
Water Disposal Tubing (from product)
see product bottom view – page 27
Ionized Water STAINLESS Steel Delivery Hose
See productFront View – page 28
Product Power Cord
- see page 28
Product Touch Sensor Panel
– See page 28
LCD DISPLAY
– See page 28
Acid water drain tubing/suction cup holder
See acid water drain tubing – page 28
~
Countertop Installation Components
₩
There are two installation configurations.
❶
Connection to the faucet.
With this installation configuration option, the product sits on the countertop and the water
supply line is connected to your faucet by removing the existing aerator and installing the
provided faucet diverter valve. The drain line from the product is placed in the sink.
The product power cord is plugged into an above the counter electrical outlet.
Ionized water is delivered via the ionized water output hose on top of the product.
The information on pages 25 & 26 provides installation instructions for the product
countertop installation option. This is the simplest installation configuration.
❷
Connection to the cold water line.
Your product is shipped with an optional cold water supply line diverter valve.
This diverter valve is installed on the cold water supply line in the cupboard area below the
sink. This eliminates the need to attach the product water supply to the faucet head.
To implement this option, you will need a 1/4" access hole through either the lip of the sink
or the counter top depending on what type of sink you have and how it is mounted.
If you have an accessory you do not use (like a soap dispenser) you can remove that
accessory and use that hole.
If an access hole is not available, you will need to drill one.
Instructions for installing the cold water supply line diverter valve are on page 26.
