54-0239
TracVision A5 Shop Manual
© 2005 KVH Industries, Inc., All rights reserved.
Before you start:
• Before connecting the power cable, remove the key from the
ignition and remove the negative lead from the vehicle battery.
Connecting the receiver power cable’s red (positive) wire:
• Connect the red wire to +12 VDC switched (accessory) power.
With
the
vehicle
running
and
the
receiver
turned
on,
power
at
the
receiver
must
measure
at
least
11
VDC.
• Do not wire any other device to the same power circuit.
Connecting the receiver power cable’s black (negative) wire:
• Connect the black wire to its own dedicated chassis ground (such
as a pillar ground screw) within 18" of the receiver.
• The black wire must make contact between the metal of the
ground screw and the metal of the vehicle frame.
Connecting to Power
Effective April 2005
Subject to change without notice