PLEASE NOTE!
If the TracVision system was left on when the vehicle was last turned
off, TracVision will automatically turn on when you start up the
vehicle. DO NOT DO ANYTHING! Wait 30-60 seconds for the
Program Guide to load and you are ready to watch TV – if the
Program Guide doesn’t load, check for blockage as noted in step 6.
1. Start the car.
2. Ensure that the power switch
on the receiver’s rear panel is
turned on and lit green. The
Voltage light should be also
be lit.
(The receiver beeps 2
or 3 times.)
3. Turn on the video screen and select the satellite input
(not the
VCR input)
.
4. If the TracVision system was left on when the vehicle was last
turned off,
Message 1
then
Message 2
will appear on the screen.
54-0239
TracVision A5 Shop Manual
© 2005 KVH Industries, Inc., All rights reserved.
Proper Operation
Effective April 2005
Subject to change without notice
Message 1
Message 2
then
CONTINUED ON NEXT PAGE...
Voltage
Light
Power
Switch
