KVH Industries Ka Tri-Americas LNB, Руководство по установке

Страница: 1 / 19

1
KVH, TracVision, and the unique light-colored dome with dark contrasting baseplate are registered trademarks of
KVH Industries, Inc. All other trademarks are property of their respective companies. The information in this document is subject to
change without notice. No company shall be liable for errors contained herein. © 2010 KVH Industries, Inc., All rights reserved.
54-0674 Rev. A
These instructions explain how to install the Ka/Ku Tri-Americas LNB on a TracVision HD7
system. Complete instructions on how to use the system are provided in the User’s Guide.
Installation Steps
Who Should Install the LNB?
To ensure a safe and effective installation, KVH recommends that a KVH-authorized marine
technician perform this procedure. KVH-authorized technicians have the tools and electronics
expertise necessary to install the LNB. To find a technician near you, visit www.kvh.com/
wheretogetservice .
Technical Support
If you need technical assistance, please contact KVH Technical Support:
1. Remove the Antenna and Get Tools... 3
2. Remove the Radome ............................. 4
3. Disconnect the RF Cables ..................... 5
4. Remove the Lower Feed/LNB ............ 6
5. Install the New Lower Feed/LNB ...... 8
6. Mount the LNB Assembly.................. 10
7. Set the Belt Tension ............................. 12
8. Reconnect and Dress Cables .............. 13
9. Mount the Hall Effect Magnet ........... 15
10. Mount the Counterweight.................. 16
11. Replace the Radome............................ 17
12. Replace the ACU SD Card.................. 18
13. Complete the Installation ................... 20
Phone: +1 401 847-3327
E-mail: techs@kvh.com
(Mon.-Fri., 9 am - 6 pm Eastern)
(Sat., 9 am - 2 pm Eastern)
Tri-Americas
TM
LNB Installation
TracVision
®
HD7