KVH Industries Ka Tri-Americas LNB, Руководство по установке

Страница: 15 / 19

16
Follow the instructions below to mount the
counterweight and reinstall the radome.
a. Slowly tilt the reflector so that it points nearly
straight upwards (see Figure 29 ).
b. Peel off the release liner from the double-
sided adhesive tape on the underside of the
counterweight.
c. Mount the supplied counterweight onto the
subreflector, as shown in Figure 29 .
d. Using a 1/16" hex wrench, tighten the two set
screws to secure the counterweight in place
(see Figure 29 ).
Mount the Counterweight
Figure 29 Counterweight/Set Screws
Subreflector
Counterweight
Set Screw
(x2)
10