9
b.
Using a 3/32" ball-end hex wrench, carefully
secure the new lower feed/LNB onto the
motor bracket with two supplied #4 hex
screws (see
).
c.
Using a 7/64" ball-end hex wrench, secure
the new lower feed onto the motor bracket
with one supplied #6 hex screw (see
).
d.
Remove the second lower feed cover screw
(see
). Then remove the
cover.
e.
Press the supplied lower feed gasket into the
grooves on the lower feed (see
).
To avoid damage, handle the new lower
feed/LNB extremely carefully once you
remove the protective cover (see
). All three phase cards on the new
lower feed/LNB must remain intact to
complete the installation.
IMPORTANT!
Continued
Install the New Lower Feed/LNB
Figure 12 Lower Feed Screws
Figure 13 Phase Cards
#4 Hex
Screw (x2)
#6 Hex
Screw
Phase
Card (x3)
Groove
Gasket
5
