Maintenance
213
Twine tubes position
The position of the twine tubes with respect to the bale chamber roller
is important. The distance between belts and bale chamber roller is
small. A correct adjustment prevents the twine tubes from touching the
belts or the bale chamber roller.
Focus
> Push to I
> Push to unlock the system and to enter the operating display
> Push to choose twine tie
> Push to extend the twine tubes
or
> Push to intend the twine tubes
> Push to 0
The system will shut down.
The distance B between the maximum diameter of the bale chamber
roller and the twine tube must be 4 mm. It can be checked by putting
a metal strip of 4 mm between the bale chamber roller and the twine
tube.
> Loosen the bolts
> Move twine tube so distance B appears
> Tighten the bolts
B
Twine tube
Belts
Bale chamber roller
Bolts
I 0
I 0
Содержание Vicon RV 2160
