Maintenance
197
Opticut maintenance
Never try to push crop into or pull crop out of a running machine. Se-
vere personal injuries can occur.
Wear safety gloves
Knives are very sharp. Always wear safety gloves when handling
knives. Not wearing safety gloves can cause serious injuries.
If the cutting system blocks
> Shut off the pto
> Stop the tractor engine
> Remove the ignition key
> Wait until all parts of the machine have come to stand still
> Now the blockage can be removed safely
Knife sharpening
Wear protective goggles
Always wear protective goggles when sharpening the knives. Flying
around sparks can cause serious injuries.
Sharpen the knives every 10 working hours at the smooth side. Never
sharpen the undulated side of the cutting edge because of excessive
wear.
The sharpness of the knives must be checked daily.
Proceed as follows:
> Remove the knife
→
Removing the knives, page 60
> Clamp the knife in the vice
Ensure the knife is not getting hot during sharpening, since that may
weaken the steel! It is better to grind more frequently than a lot at
once.
> Sharpen the knife on the smooth side, using a grinder
> Reinstall the knife
→
Installing the knives, page 62
W
A0474
Содержание Vicon RV 2160
