96
Use at the field
Bale growth
In the working screens, the display always shows a vertical bale
growth bar. The values beside match the pre-set bale diameter. The
bar displays the part of the bale diameter which has been reached.
When the bale chamber is empty, the bale growth bar is empty (set to
0).
Twine tie system
During baling the twine tie system remains in its rest position.
Except for baling flax.
Upon activation of the tying system the twine tubes move to the bor-
ders of the bale.
In order to ensure a good twine tie starting it is necessary that the
twine ends T protrude about 10 cm out of the twine tubes.
The twine brake is released momentarily in order to allow the twine to
start running. As soon as the twine has been caught by the bale the
twine indication rollers rotate and the lateral wraps are laid around the
outer sides of the bale.
Bale growth
bar
Maximum bale
diameter
90% of pre-set
bale diameter
Rest position
T
Twine tubes
T
Twine ends
Twine indication rollers
Содержание Vicon RV 2160
