Kverneland Vicon RV 2160, Руководство по эксплуатации

Страница: 211 / 263

Maintenance
211
Mechanical twine
tie settings
Knife arm
Wear safety gloves
The twine knife is very sharp. Always wear safety gloves when han-
dling the twine knife. Not wearing safety gloves can cause serious in-
juries.
At the end of the twine tie cycle the knife arm moves to both twine
threads cutting them almost simultaneously.
Focus
> Push
> Push
The twine tubes move to their basic position.
Tellus
> Push
> Push
Ensure the cutting edge is sharp since the correct function depends
on it.
The twine knife is dull if
•
one or both twine threads are not cut
•
the cutting profile is long and fuzzy
Twine knife
In case of a dull twine knife, it can be exchanged.
> Switch off the pto
> Switch off the electronic control system
> Shut down the tractor engine
> Remove the ignition key
> Loosen the nuts
> Take out the dull twine knife
> Place a new twine knife
> Tighten the nuts
Knife arm
Twine knife
Nuts