Kverneland 2620M, Руководство пользователя

Страница: 17 / 47

17
Attachment
Spring catch for hilly ground
Attachment
Adjusting the springs
Attachment
Adjusting the springs
Attachment
Chain for locking the lift arms
(option)
• The machine can be equipped
with a chain to prevent the
tractor's lift arms from
lowering. The chain is fitted
between the highest point on
the tractor and one of the lift
arms.
To ensure that the cutting unit is
correctly balanced, the springs
should be pre-tensioned in the
following way:
•
If lower ground pressure is
required, the distance shown
must be reduced.
• If higher ground pressure is
required, the distance shown
must be increased.
Assembly - attachment
• The machine's spring must
not be detached, under any
circumstances. If an
attempt to detach it is
made, large amounts of
energy which are stored in
the spring will be suddenly
released and can cause
serious injuries or death.
• Only authorized persons
may detach this
component.
Option but standard for the US
and Canada.
•
The spring catch keeps the
machine in position in relation to
the tractor. If the machine meets
an obstacle, release the catch,
and the machine will swing
behind. After the obstacle has
been passed, the suspension
spring will pull the machine back
and the catch will automatically
lock again. The spring catch is
factory fitted as shown.
• The spring catch must be
tightened to a maximum of 62
mm (2 7/16”), otherwise the catch
may lock.
• On hilly ground, it is possible that
the spring lock may be tightened
further during use. It is
recommended that the screw be
tightened by one turn and then
the setting checked.
!