Kuvinos MultiPot KMP 600 Series Скачать руководство пользователя страница 6

11

10

PARTS INSTRUCTIONS

1.    Lid

        The Lid has a safety lock pin. A sound will play when the Lid is being locked or unlocked.  

        Lock the Lid in place for pressure cooking programs to build pressure. Leave the Lid off  

        when using Saute. An Error code "Lid" will appear on LCD screen if the Lid is out of  

        locked position when positioned. While cooking under pressure, you will not be  

        able to open the Lid until all pressure is released.

2.    Steam Release Valve with Handle

        The Steam Release Valve is installed on the top of the Steam Release Pipe and used to  

        manually release pressure instantly. Make sure the Steam Release Handle is in the  

        "Sealing" position when cooking under pressure. Turn the Steam Release Handle  

        to the "Venting" position to manually release pressure after pressure cooking.

3.    Float Valve

        Controls the amount of pressure inside the cooker by allowing excess pressure to be released.  

        The Float Valve rises as the cooker heats up and pressure builds, then drops as pressure is  

        released. Do not open the Lid before the Float Valve has completely dropped.

4.    Cool-Touch Lid Handles

        Allows for easy handling and opening of the Lid.

5.    Sealing Ring

        Creates an airtight seal for the cooker to build up pressure. Check the Sealing Ring for any  

        cracks or damage before use.

6.    Self-Locking Pin

        Lid will lock automatically when it is properly aligned and closed.

7.    Anti-Block Shield

        Prevents the Steam Release Pipe and Steam Release Valve from being blocked.  

        (See picture in Page 3)

8.    Removable Inner Pot

         Ingredients should only be placed in this Pot.

9.    Stationary Exterior Pot

         This pot cannot be removed from the pressure cooker and ingredients should NEVER be  

         placed here directly. Before cooking, be sure to first set the Removable Inner Pot inside  

         the Stationary Exterior Pot. Keep Dry.

10.  Condensation Collector

         Made of plastic, the Condensation Collector can be removed for drainage and cleaning.  

         It collects steam that condenses along the rim of the pressure cooker.

11.   Control Panel with LCD Display

          Allows you to select and adjust different programs. The LCD Display shows cooking  

          information and settings.

12.  Temperature Sensor

          Regulates cooking temperature inside the pressure cooker.

13.   Heating Element

          Heats the Removable Inner Pot when cooking, and regulates the cooking temperature  

          inside the pressure cooker.

14.  Spoon Racks

          Used to store the Rice Paddle and Soup Ladle.

Содержание MultiPot KMP 600 Series

















Отзывы: