Chapter 4.
Audio Mode
Chapter 4. Audio Mode
Audio Mode controls the SP7's audio input and audio interface.
Two XLR combo audio inputs with phantom power on the SP7 rear panel allow audio recording to DAWs. The SP7's
audio interface has a DSP function, allowing you to apply dedicated vocal processing to incoming audio signals. This
feature is useful in a variety of situations from live performances to personal recording studio environments.
Audio mode consists of “General”, “Input 1”, and “Input 2”. Depending on parameter settings, the input vocal
processor
(In VoxProc) can be configured.
4-1. General
General tab includes “Input Ch Link” (Input Channel Link), “‘In Moni. Level” (Input Monitor Level), “Monitor Mode”,
“Playback Level”, “Vocal Proc. Route” (Vocal Processor Route), and USB settings.
Input Ch Link (Input Channel Link)
Sets inputs 1 and 2 to stereo channels. When “ON”, Input 1 and Input 2 are linked and these settings are
applied equally to Inputs 1 and 2.
In Moni. Level (Input Monitor Level)
Controls the headphone and monitor jack volume for the input signal.
