Kurzweil SP7 Grand Скачать руководство пользователя | Manualshive

Страница: 10 / 64

background image

Chapter 1.

Started

The SP7's knobs, buttons, joysticks and pedals typically control various performance parameters, zone volume,
synthesis and FX parameters. Controller assignments can be adjusted or set to user-assignable parameters in

Global Mode.

CONTROL Section

There are 8 knobs with colored LEDs located in the upper half of the control section.
By default, the knobs are preset to: EQ Lo, EQ Mid Lo, EQ Mid Hi, EQ Hi, Delay Time, Delay Level, Reverb Time
and Reverb Level. The function of each knob can be user customized on the Control page in Global Mode.

CONTROL Knobs

There are 8 buttons with colored LEDs on the lower half of the control section.
Each button defaults to turning on/off each Zone (1 to 8). The function of each button can be user customized

on the Control page in Global Mode.

CONTROL Buttons

The joystick is on the lower left corner of the front panel.

The joystick defaults to pitch bend for the X axis (left and right) and modulation for the Y axis (up and down).
The function of the joystick can be user customized on the Control page in Global Mode.

JOYSTICK

The CURSOR buttons are the five buttons immediately below the display. The ARROW buttons move the on
screen cursor (left/up/down/right) and the SELECT button invokes the selected item/field. Use the cursor
buttons to move to any position on the LCD screen, select a function with the SELECT button, then use the
ALPHA WHEEL or [DECREASE-]/[IN] buttons to change the parameter value of the currently selected

function.

Note: The ARROW and SELECT buttons do not have LEDs.

CURSOR Buttons (Arrow / Select buttons)

The large LED lit dial can be used to navigate through the list of Sounds as well as adjust various on screen
parameters. Turning the ALPHA WHEEL counterclockwise works the same as [DECREASE -] and turning it
clockwise works the same as [IN]. Turn the ALPHA WHEEL slowly to change the value by one incre

-

ment, or turn it quickly to jump several increments.

ALPHA WHEEL

«
...
8
9
10
11
12
...
»

Содержание SP7 Grand

































































Отзывы:

Нет отзывов

Похожие инструкции для SP7 Grand

Бренд: Omnia Страницы: 8

Бренд: Cadman Страницы: 66

Бренд: ZIGBEE Страницы: 4

Бренд: CAIRE Страницы: 38

Бренд: Caframo Страницы: 72

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Страницы: 12

Бренд: Hanil Страницы: 24

Бренд: Hanil Страницы: 32

Бренд: Hanil Страницы: 24

Бренд: Nellcor Страницы: 161

OXIMAX N-600X Series

Бренд: Nellcor Страницы: 210

Бренд: OAKWORKS Страницы: 24

Бренд: WalkMed Страницы: 2

Бренд: Walinga Страницы: 20

Бренд: MadLab Страницы: 7

Бренд: Unika Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды