Kurzweil SP7 Grand Скачать руководство пользователя

Страница: 17 / 64

2-1. Screen Layout

The status bar at the top of the FAVORITE mode screen displays the Transpose value, Auto Power off status (if
enabled) and system Tempo.

Below the top row, you will see the ID and name of the currently selected Sound and “Menu” button off to the right.

The Favorite Group selection buttons, A-D, are displayed down the left side of the screen. On the right side you

will

see the Sound presets belonging to the currently selected Favorite Group.

2-2. Select a Favorite

Tap one of the 4 Group buttons on the left. The selected Group button is displayed as active in white, and its corre

sponding 16 members are displayed in a 4x4 grid on the right.

To select a specific Favorite either tap the desired Favorite tile on the right or use the front panel physical CATEGORY

buttons to load the corresponding Sound.

2-3. Assign a Favorite

Select a Sound from the SoundList in SOUND Mode and then enter FAVORITE Mode.

Next, Select the desired Group (A-D).

Lastly, press and hold either:

a) one of the 16 tiles on the screen, or

b) one of the front panel physical CATEGORY buttons

Hold the button (approx. 2 sec) until you see that the Sound of the corresponding tile has changed to your new

selection.

Chapter 2.

Favorite Mode

Содержание SP7 Grand

































































Результаты поиска

Содержание SP7 Grand

Отзывы:

Похожие инструкции для SP7 Grand

Бренды по названию

Популярные бренды

Kurzweil SP7 Grand, Руководство музыканта

Результаты поиска

Содержание SP7 Grand

Отзывы:

Похожие инструкции для SP7 Grand

Бренды по названию

Популярные бренды