manualshive.com logo in svg

Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B, Справочник

Поделиться
Скачать
Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B Скачать руководство пользователя страница 89

Algorithm Reference

MutualFreqOffset

3-49

MutualFreqOffset modulates the two input signals (left and right) with each other. If one of the signals is 
a sine wave, the algorithm behaves like Frequency Offset. Now imagine that one of the input signals is the 
sum of two sine waves. Both of the two sine waves will modulate the signal on the other input. For 
example, if the two sine waves are at 100 Hz and 200 Hz, upward modulation of another signal at 1000 Hz 
will produce pitches at 1100 Hz and 1200 Hz. Obviously this is going to get very complicated to work out 
when the inputs are more than simple sine waves. MutualFreqOffset may require extra gain 
compensation so separate left, right input gain controls and a gain control for the final (wet) output are 
provided.

Figure 22

Block diagram of MutualFreqOffset 

With downward modulation, you will hear the pitch drop as you increase the frequency of the input 
sound. The downward modulation is a difference (subtraction) in frequencies. If the difference drops to 
negative values, the frequency will start to rise again. It doesn’t matter which frequency gets subtracted 
from the other, since the result will sound the same. For example 1000 Hz - 100 Hz = 900 Hz will produce 
the same pitch as 100 Hz - 1000 Hz = -900 Hz. Similarly, upward modulation is a sum of frequencies and 
pitch will rise as you increase the frequency of input sound. However in a digital sampled system, 
frequencies higher than half the sample rate (the Nyquist rate, 24 kHz in KDFX) cannot be represented. 
When the summed frequencies pass the Nyquist rate, the pitch starts coming back down.

Both Frequency Offset and MutualFreqOffset provide panning with width of the dry input signals 
directly to the output.

Parameters (Frequency Offset):

Page 1

Wet/Dry

0 to 100 %wet

Out Gain

Off, -79.0 to 24.0 dB

In Lowpass

8 to 25088 Hz

Содержание KDFX V2 - MUSICIANS REFERENCE REV B

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды