manualshive.com logo in svg

Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B, Справочник

Поделиться
Скачать
Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B Скачать руководство пользователя страница 100

3-60

Algorithm Reference

Band Compress

ComprsChan

Select which input channel will receive compression processing—left, right or both. If you 
select left or right, the opposite channel will pass through unaffected.

FdbkComprs

A switch to set whether the compressor side chain is configured for feed-forward (Out) or 
feedback (In).

Atk Time

The time for the compressor to start to cut in when there is an increase in signal level 
(attack) above the threshold. 

Rel Time

The time for the compressor to stop compressing when there is a reduction in signal level 
(release) from a signal level above the threshold.

SmoothTime

A lowpass filter in the control signal path. It is intended to smooth the output of the 
compressor’s envelope detector. Smoothing will affect the attack or release times when 
the smoothing time is longer than one of the other times.

Signal Dly

The time in ms by which the input signal should be delayed with respect to compressor 
side chain processing (i.e. side chain predelay). This allows the compression to appear to 
take effect just before the signal actually rises.

Ratio

The compression ratio in effect above the compression threshold. High ratios are highly 
compressed; low ratios are moderately compressed.

Threshold

The compression threshold level in dBFS (decibels relative to full scale) above which the 
signal begins to be compressed.

MakeUpGain Provides an additional control of the output gain. The Out Gain and MakeUpGain 

controls are additive (in decibels) and together may provide a maximum of 24 dB boost to 
offset gain reduction due to compression.

Содержание KDFX V2 - MUSICIANS REFERENCE REV B

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды