manualshive.com logo in svg

Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B, Справочник

Поделиться
Скачать
Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B Скачать руководство пользователя страница 85

Algorithm Reference

Gated LaserVerb

3-45

Gate Thresh

The signal level in dB required to open the gate (or close the gate if Ducking is on).

Gate Duck

When set to Off, the gate opens when the signal rises above threshold and closes when 
the gate time expires. When set to On, the gate closes when the signal rises above 
threshold and opens when the gate time expires.

Gate Time

The time in seconds that the gate will stay fully on after the signal envelope rises above 
threshold. The gate timer is started or restarted whenever the signal envelope rises above 
threshold.

Gate Atk

The time for the gate to ramp from closed to open (reverse if Ducking is on) after the 
signal rises above threshold.

Gate Rel

The time for the gate to ramp from open to closed (reverse if Ducking is on) after the gate 
timer has elapsed.

GateSigDly

The delay in milliseconds (ms) of the signal to be gated relative to the side chain signal. By 
delaying the main signal, the gate can be opened before the main signal rises above the 
gating threshold.

Содержание KDFX V2 - MUSICIANS REFERENCE REV B

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды