manualshive.com logo in svg

Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B, Справочник

Поделиться
Скачать
Kurzweil KDFX V2 - MUSICIANS REFERENCE REV B Скачать руководство пользователя страница 110

3-70

Algorithm Reference

HarmonicSuppress

SmoothTime

A lowpass filter in the control signal path. It is intended to smooth the output of the 
expander’s envelope detector. Smoothing will affect the attack or release times when the 
smoothing time is longer than one of the other times.

Signal Dly

The time in ms by which the input signal should be delayed with respect to expander side 
chain processing (i.e. side chain predelay). This allows the expansion to appear to turn off 
just before the signal actually rises.

Ratio

The expansion ratio. High values (1:17 max) are highly expanded, low values (1:1 min) are 
moderately expanded.

Threshold

The expansion threshold level in dBFS (decibels relative to full scale) below which the 
signal begins to be expanded.

MakeUpGain Provides an additional control of the output gain. The Out Gain and MakeUpGain 

controls are additive (in decibels) and together may provide a maximum of 24 dB boost to 
offset gain reduction due to expansion.

Содержание KDFX V2 - MUSICIANS REFERENCE REV B

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды