Kurzweil K150 - ANNOTATED PROGRAM LIST Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 55

background image

4-1

The Tuning Editor

The Tuning Editor lets you specify instrument-wide tuning, set a master transposition value, and activate the programmable
intonation table.

Using the Tuning Editor

Select Tuning Editing by pressing EDIT F2. (The abbreviation TUNE is printed above the F2 key on the button-pad.)

The parameters shown in Table 4-1 can be edited. One will appear in the display; the others can be selected by using NEXT
and PREV.

Table 4-1

Tuning Editor Parameter

Display Reads

Parameter

Adjustable Values *
(use INCR and DECR)

What it Does

MAST TUNE

Master Tuning

±

0-125C

Tunes the entire instrument.

TRANSPOSE

Transposition

±

60ST

Transposes the entire instrument.

INTONATION

Intonation Switch

On/Off

Switch for intonation parameters.

REFERENCE KEY

Reference key

Entire Musical Scale

Sets a reference key for intonation.

* If the value is numeric, you can also enter the value directly with the right button-pad and press ENTR.

Note that you can specify tuning and transposition values for individual layers with the Layer Editor (see Layer Editing).

See the sections on each parameter later in this chapter.

Master Tuning

When the display reads MAST TUNE, the pitch of the K150X may be tuned by

±

125C.

Enter a value using the numeric button-pad and press ENTR, or use INCR and DECR to change the value by 10 cent
increments.

If a value greater than 125 is entered using the numeric button-pad, the value will be set to 125 when ENTR is pressed.

This tuning is in addition to any tuning specified for a particular layer with the

.TUNE

parameter in the Layer Editor. For

example, if the Master Tuning for the K150X is set at +3C, and a layer is given a tuning of +2C, the layer will have a +5C
tuning relative to the natural pitch.

Transposition

When the display reads TRANSPOSE, the K150X can be transposed from 0 to

±

6O semitones.

Enter a value using the numeric button-pad and press ENTR, or use INCR and DECR to change the value by 1 semitone
increments.

If a value greater than 60 is entered using the numeric button-pad, the value will be set to 60 when ENTR is pressed.

This transposition is in addition to any transposition specified for a particular layer with the .TRANS parameter in the Layer
Editor. For example, if the master transposition for the K150X is set at +3ST, and a layer is given a transposition of +2ST,
the layer will have a +5ST transposition relative to the natural tone.

Intonation

«
...
14
15
16
17
18
...
»

Содержание K150 - ANNOTATED PROGRAM LIST
























































Отзывы:

Нет отзывов

Похожие инструкции для K150 - ANNOTATED PROGRAM LIST

Бренд: OfiTE Страницы: 21

Бренд: Earthlite Страницы: 4

Бренд: YATEK Страницы: 78

WJHD100 - DIGITAL DISC RECORDE

Бренд: Panasonic Страницы: 7

Бренд: Panasonic Страницы: 174

Бренд: Tascam Страницы: 80

Бренд: Tascam Страницы: 2

Бренд: Walker Страницы: 24

Бренд: RASHA PROFESSIONAL Страницы: 11

Бренд: MADRIX Страницы: 24

Бренд: MADRIX Страницы: 28

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренд: Yamaha Страницы: 4

Бренд: Wacker Neuson Страницы: 120

mocon AQUATRAN 3/38

Бренд: Ametek Страницы: 85

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды