Kurabo QuickGene-810, Руководство по эксплуатации

Страница: 66 / 78

1
2
6
3
4
5
7
5 How to Set Parameters
42 QuickGene-810 Operation Manual
Rev. 1.7
■ EXPERT mode
EXPERT mode is used to set more detailed parameters than in the normal setup mode.
The following explains how to shift to the EXPERT mode.
(1) Select the extraction mode whose
parameter is to be changed.
Press the [MODE] button several times until the
target extraction mode appears.
(2) Press the [ ] [ ] buttons
simultaneously.
Setup mode starts.
(3) Hold down the [MODE] or [DISCHARGE]
button until the following message is
displayed on the LCD:
"EXPERT MODE? Y
→
"
(4) Press the [ ] button.
Change the mode to the EXPERT mode.
Settings of parameters in EXPERT mode can be changed with the same procedures as in the normal setup
mode. For details, refer to "
■
How to change Parameters"(
→
page 39).
38 WAS2 VOL4 250 - 750 µl 750 500 500 750 750 750 750
39 WAS2 VOL5 250 - 750 µl 750 500 500 750 750 750 750
40 ELUT VOL 50 - 400 µl 200 100 100 200 100 100 50
41 ELUT COUNT 0 - 5 time(s) 1 1 1 1 1 1 1
42 ELUT SPEED 1 - 12 7 7 7 7 7 7 7
43 ELUT PEAK 50 - 160 kpa 100 100 100 100 100 100 100
44 ELUT UP TIME 1 - 50 sec 4 4 4 4 4 4 4
45 ELUT RETRY 50 - 160 kpa 140 140 140 140 140 140 140
46 ELUT LOWER 3 - 100 kpa 65 65 65 65 65 65 65
47 ELUT DOWN TM 1 - 99 sec 15 15 15 15 15 15 15
48 ELUT R DN T 1 - 100 sec 50 50 50 50 50 50 50
49 ELUT FALL 5 - 60 kpa 50 50 50 50 50 50 50
50 ELUT DIP TM 0 - 510 kpa 0 30 30 90 30 30 0
51 W DSVOL S
3000 -
5500
µl 3000 3000 3000 3000 3000 3000 3000
52 E DSVOL S
3000 -
5500
µl 3000 3000 3000 3000 3000 3000 3000
53 BUZZER
ON or
OFF
- ON ON ON ON ON ON ON
54 DETECT PRES 1 - 50 kpa 15 15 15 15 15 15 15
55 DOWN PRES 10 - 50 kpa 50 50 50 50 50 50 50
Display
sequence
LCD message
Setting
range
Unit
Mode name (The value displays the default)
DNA
WHOLE
BLOOD
RNA
CELL
RNA
CELL
PLUS
DNA
TISSUE
RNA
TISSUE
RNA
TISSUE
PLUS
PLASMID