manualshive.com logo in svg

Kurabo QuickGene-810, Руководство по эксплуатации

Поделиться
Скачать
Kurabo QuickGene-810 Скачать руководство пользователя страница 11

QuickGene-810 Operation Manual 

Rev. 1.7

ix

1

3

2

5

4

6

7

Safety Information

This chapter describes safety precautions.
For your safety and that of others, follow the guidelines provided in the following pages concerning the 
use of the QuickGene-810.

About Instrument

WARNING:

•

Ignoring the following notations may lead to fire or electric shock.

-

Use a power cable that meets your country's standard, or contact your local 
distributor.

-

Connect to a grounded outlet to reach the power source.

-

Do not touch the plug with wet hands

-

Do not use the QuickGene-810 with voltage other than the voltage specified on 
the device. Do not overload the power outlet with too many devices.

-

Do not use the QuickGene-810 with a damaged power plug or a loose socket.

-

When dust is on the prongs of the power plug or the plug socket, clean with a 
dry cloth.

-

When you disconnect the plug from the outlet, be sure to hold the power plug 
itself. Do not pull the power cable.

-

For maintenance, disconnect the power plug from the outlet.

-

Do not touch the power plug when you hear the crash of thunder.

•

Do not pour any liquid on the QuickGene-810. Do not place any 
objects containing liquid on the QuickGene-810. Doing so may cause 
a device failure, fire, or electric shock.

•

In the event the device overheats, starts to smoke or smells strange, 
immediately unplug the power cable.

•

Do not insert fingers while the carrier is travelling to the right or left 
end, or the table unit is travelling horizontally.

CAUTION: 

•

Never attempt to remodel the QuickGene-810 without the 
manufacturer's permission. Doing so may cause fire or electric shock.

•

Do not place or drop objects on the QuickGene-810. Also refrain from 
bumping or knocking it, as doing so may cause a failure or 
malfunction of the QuickGene-810.

•

If any liquid materials are left inside the device, wipe with a paper 
tissue.
Otherwise, the QuickGene-810 may be damaged.

•

The front cover will not stay on the way to the upper limit. If you 
release the front cover while opening it, it may cause injury or device 
damage.

•

In the event of an ethanol spill, immediately unplug the power cable. 
(Ethanol may catch fire if spilled)

•

Repairs to the QuickGene-810 should only be performed by such 
agencies as are specifically authorized by FUJIFILM Corporation.

•

Only original FUJIFILM Corporation replacement parts shall be used.

•

If the equipment is used in a manner not specified by the 
manufacturer, the protection provided by the equipment may be 
impaired.

KURABO INDUSTRIES.

    

  KURABO INDUSTRIES  

Содержание QuickGene-810















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды