Kuppersbusch EKI 6130, Руководство по обслуживанию

Страница: 17 / 25

Service Manual 17
For internal use only
10.3 Substitution of IPC
10.4 Types of IPCs (LS & SS)
There are 2 different configurations for IPCs, depending on the so-called resonant capacitors (res caps).
We call them configuration LS or SS.
Configuration LS has different size of res caps pair. One pair is bigger than the other one. The bigger
pair is intended to drive only a coil of diameter Ø 210 mm.
So a LS IPC has to be used each time a
Ø 210 coil is to be connected.
Configuration SS has same size and kind of res caps (small). The small pair of res caps is intended to
drive coils of diameter Ø 145, Ø 180 or dual (Ø 260).
A SS IPC has to be used when coils different
to Ø 210 are to be connected.
Next pictures show details of the explanation given above. It should also be considered that the dual coil
(
∅
260 mm) needs a special wiring sequence that is explained later. For the other coils, the 2 wires can
be connected to any of the 2 metallic “towers” corresponding to the suitable channel inside the IPC.
IPC with LS configuration
IPC with SS configuration
bigger
capacitors
∅
210 mm
inductor
always here