Kuppersbusch EKI 6130, Руководство по обслуживанию

Страница: 14 / 25

14 Service Manual
For internal use only
Once the right configuration number is chosen, then pressing CHILD LOCK it will be confirmed and
downloaded inside the hob. The decimal dot of zone 2 blinks for a few seconds, while downloading.
Finally the USIF goes, automatically, to checking mode. By using ON/STAND BY button the menu is left
and the appliance will start its usual behaviour.
9.2.4 Configuration numbers and models
Once inside “Configuration mode” (CO), in case it is not possible to configure the
system because one of the boards refuses to accept the configuration, a failure “EE”
will be displayed for 5 seconds on the displays instead of “CO”, and a constant beep
will be emitted. Then the menu CO is possible to be entered again.
IMPORTANT !!!
After leaving Configuration Mode it is compulsory to reset the USIF in order to update
the stored configuration. In order to do that, you have to UNPLUG the hob from the
mains and wait for ten seconds before plugging it again.
After plug-in, in case there is a wrong configuration, we will see an error message “F XX”.
Config. no. Model Features
35 IR / IT 641 Hob with 4 cooking zones with timer
45 IR / IT 631 Hob with 3 cooking zones (145+210+dual right) with timer
47 IRC 631 Hob with 3 cooking zones (145+180+dual right) with/without timer
48 IR 630 Hob with 3 cooking zones (145+180+dual right) with timer