Kuppersbusch EKI 6130, Руководство по обслуживанию

Страница: 13 / 25

Service Manual 13
For internal use only
9.2.2 Access to one of these modes
Once the display is showing CO, CH or IF, to enter into one of these three modes it is necessary to press
the CHILDLOCK key. As general performance CHILDLOCK key is a button that works as <enter>,
confirming the current option.
9.2.3 Configuration mode
Configure the appliance means: “choose the proper configuration for the USIF and for each IPC present
in the hob”. In this mode the operator can configure the whole system from the USIF. To enter into this
configuration menu it is necessary to press the Child/lock button when CO is shown on the displays.
Once this configuration sub-menu (CO) is acceded, 70 different hob configurations already stored in the
EPROM of the USIF will be available. For choosing one of these configurations, (+) and (-) buttons of
cooking zones 2 and 3 will be used, as it is shown in the next picture.
It is possible to see different numbers on the display, which sequentially moves from 00 to 69. The
following pictures show how to move inside the sub-menu of the configuration. It is possible to use the
relative (+) and (-) buttons to increase the units or the tens.
This previous pictures show how to change the tens, whilst the following one shows how to change the
units.