IC-Module for EtherNet/IP
99 / 137
2.1.1 SDI Communication
Bitrate
In this menu you have the option, to select the appropriate Bitrate for
your application.
The default value is "Automatic Bitrate detection".
--------------------------------------------------
KUNBUS-
IC
– SDI Communication: Set Bitrate
--------------------------------------------------
1 – Automatic Bitrate detection
2 – 2400 Bit/s
3 – 4800 Bit/s
4 – 9600 Bit/s
5 – 19200 Bit/s
6 – 38400 Bit/s
7 – 57600 Bit/s
8 – 115200 Bit/s
--------------------------------------------------
>
2.1.2 SDI Communication-
Set Parity
In this menu you have the option to select the appropriate parity for
your application from the displayed values.
The default value is "Even Parity (1 stop-bit)".
The number of stop bits automatically depends on the parity setting.
This ensures that a transmission always attaches the same number
of bits to one byte.
--------------------------------------------------
KUNBUS-
IC
– SDI Communication: Set Parity
--------------------------------------------------
1 – Even Parity (1 Stopbit)
2 – Odd Parity (1 Stopbit)
3 – No Parity (2 Stopbits)
--------------------------------------------------
>
2.1.3 Set Modbus Node
Address
In this menu you have the option, to enter the Modbus Node
Address.
Permitted input values: 1-247
--------------------------------------------------------
KUNBUS-
IC
- SDI Communication: Set Modbus Node Address
--------------------------------------------------------
Enter a Modbus Node Address between 1 and 247:
--------------------------------------------------------
>
CDI
