Use Environment
Ambient temperature : 0 - 50 ℃ Humidity : 20 - 95 % ( non condensing )
Fastening Method
Torque method
Parameters to be set
Set torque, fastening mode ( right hand screw/left hand screw )
Resolution
1 Nm
Set Torque Range
400 - 800 Nm 1Nm/step
Accuracy
± 5%
Display
Numeric representation
0 - 999 3 digit LED with 7 segments Displayed by x 1Nm
Judgment Lamp
OK ( green ) : Lights when reaching to the set torque
NG ( red ) : Lights when fastening is interrupted. Warns insufficient torque.
Controller
Pre Set Key
Uses to select the pre-set torque.
Uses as +, SET, and/or - when changing the torque.
+ and - Key
When the + key is pressed, 1Nm is added to the set torque. When - key is
pressed, 1Nm is subtracted from the set torque.
By keep on pressing the key, the numeric value can be fast-forwarded.
SET Key
After changing the torque value, this key is to complete the setting.
Power Key
Uses to manually startup for the set torque setting, etc.
Battery
AA dry cell x 6 alkaline ( recommended ), Oxyride, Ni-MH dry cell are applicable
Automatic Power Off
Power is automatically turned off about 10 seconds after fastening or loosening
is operation is finished, or key operations are completed.
Main Unit Specifications (controller included)
Controller Specifications
** Reactive force absorber, socket, and batteries not included.
1" Sq.
1" Sq.
0.38 m /min
13.5 c.f.m.
0.38 m /min
13.5 c.f.m.
100 r.p.m.
100 r.p.m.
18 in
6.4 kg
14.1 lbs
6.7 kg
14.7 lbs.
PTS-800EX
PTS-800EXL
Drive Size
404 mm
15.9 in
457 mm
Length
Weight **
Free Speed
Air Consumption
3
3
