KUHN FC 202, Руководство по сборке и эксплуатации

Страница: 36 / 44

- 34 -
END OF SEASON SERVICE
To ensure best performance at the
beginning of the next season, take the
mower conditioner to your Kuhn dealer
for an inspection and any necessary
service work at the end of each season.
1. Store the mower conditioner in a dry
place.
2. Clean the mower thoroughly inside and
outside. Trash and dirt will draw
moisture and cause rust.
3. Thoroughly lubricate the machine
according to the lubrication section
(see pages 30 & 31).
4. Paint all parts from which the paint
has worn.
5. Loosen the drive belts and at the same
time check their condition. Replace
the complete set if necessary (see
page 20).
6. Check the condition of the knives,
turn them over to use the second
cutting edge if necessary. Check that
there is no missing flails on the
conditioning rotor (FC 202).
7. List the replacement parts that will
be needed and order them early. The
dealer at this time can expedite
delivery of parts and install them
during slack periods, thereby avoi-
ding delays for the next season.
Attention : Check the condi-
tion of all safety guards and
covers. Replace if worn or
damaged.
BEGINNING OF SEASON SERVICE
1. Check the oil levels (see page 30).
2. Grease the complete machine as de-
scribed on pages 30 & 31 to force out
any collected moisture out of the
bearings.
3. Retighten the drive belts as descri-
bed on page 20.
4. Check the tightness of all nuts and
bolts.
5. Check the adjustment of the safety
breakaway (page 19).
6. If any major moving parts have been
replaced, they should be run in.
7. Review your operator’s manual.
STORAGE