KUHN FC 202, Руководство по сборке и эксплуатации

Страница: 6 / 44

- 4 -
20. Be particularly cautious when turning corners, paying attention to machine overhang, length, height and weight.
21. Before operating the machine, ensure that all safety guards are firmly in place and in good condition. If worn
or damaged, replace immediately.
22. Before operating the machine, check tightness of nuts and bolts, particularly on tool fixing elements (blades,
tines, knives, spades ...). Retighten if necessary.
23. Keep clear of the machine operating area.
24. WARNING ! Danger of crushing and shearing can exist when components are operated by hydraulic or
pneumatic controls.
25. Before leaving the tractor or before adjusting, maintaining or repairing the machine, turn off the engine, remove
ignition key and wait until all moving parts have come to a complete stop.
26. Do not stand between the tractor and the machine unless the hand brake is tight and/or stops have been placed
under the wheels.
27. Before any adjustments, maintenance or repairs are carried out, ensure that the machine cannot be started
up accidentally.
ATTACHMENT
1. When attaching or removing the machine from the tractor, position hydraulic lift control lever in such a way that
it cannot be set off accidentally.
2. WARNING ! Danger of crushing and shearing can exist in the lifting zone of the 3-point linkage !
3. Do not stand between the tractor and the machine when operating the outer control lever of the lift mechanism.
4. In transport, the machine lift mechanism should be stabilized by tractor tie rods to avoid floatation and side
shifting.
5. When transporting the machine in the raised position, lock the lift control lever in place.
POWER TAKE-OFF