KUHN EL 92, Руководство по сборке и эксплуатации

Страница: 28 / 46

- 26 -
B) CRUMBLER ROLLER : 2.05 m - Kit no. 123 6510
2.30 m - Kit no. 123 6500
The crumbler roller is ideal for dry and slightly humid conditions. It is made up of fixed welded tubes (F) and removable
bars (G), held in place by round support rings (photo 28).
With removable bars in place :
Recommended in dry conditions for fine tillage and levelling with good ground packing.
Without removable bars in place :
Recommended in more humid ground, less risk of roller clogging. Tillage and levelling are coarser.
Bars can be removed as follows :
- Remove inside roll pins (L) (photo 28)
- loosen the bars (G) (photo 28) using a hammer
- pull out the bars.
Using 8 bolts (U) and M12 nuts, mount the roller arms (B) together with the covers (M)on the roller bearing housings
(T) placing a spacer (N) as shown on photo 29 (torque 10 daNm / 75 ft.lbs).
Then fit the swinging arms (A) on roller arms (B) with 6 bolts (C) (M16) (torque 22 daNm / 160 ft.lbs) (photo 29).
Mount complete roller with roller arms (A) onto support yokes (K) using two pins (X) secured with 2 self-locking
screws (J) (M10x16). Make sure to fit spacers (D) (see photo 23, page 23).
28
29