Kugelmann Maschinenbau DUPLEX INOX, Руководство по эксплуатации

Страница: 40 / 50

If screws do not transport or if they are tight:
Let the screw run in reverse mode for a short time (in manual mode). Act with utmost caution, the conveyor
screws may be tight.
Please absolutely respect the danger instructions, switch off the motor and remove the ignition key!
If no spreading material leaves the chute, the spreading material container must be emptied by means of a
shovel.
Possibly, spreading material may have been frozen over the conveyor screw or foreign material could
have dropped into the screw channel.
Hand wheel right-hand conveyor screw Hand wheel for emergency operation of spreading disc Hand wheel for left-hand conveyor screw
Push-button for reversing of conveyor screws at k-tronic or toggle switch for MCSS 3/4 not visible on this image.
The grid of the spreading container must never be removed during operation. Switch off the motor
and remove the ignition key!
Manual operation is only provided for emergency situation. Defective parts must be repaired
immediately, consult your distributor or a specialist workshop.
Subject to modifications
40
_Operation of spreader